From Lissaire

A clothes steamer cannot keep a cotton shirt pulled smooth until the shirt is dry. Our machine can. First, here is what our machine cannot do.

We're Lissaire. We sell the Lissaire Automatic Ironing Machine, and this page is about it.

You pull a shirt over the shirt attachment (the part of the machine that goes inside the shirt) while the shirt is still damp from the washer. The attachment fills with air and keeps the whole shirt gently pulled smooth while warm air dries it. Your hands are free while it runs.

Our machine has limits, like every tool. Here they are, before you watch it work.

From the Lissaire team

A woman reads a book with a cup of coffee while a navy shirt dries on the Lissaire machine.
A shirt on our Lissaire machine, with the weighted clips on the bottom of the shirt. A person reads a book in the same room.

Read this first: what our machine cannot do

Our machine needs a damp shirt.

Our machine does its work while the shirt dries. So the shirt has to be damp before you start the machine: still damp from the washer, but not dripping. A shirt that is dry keeps its wrinkles. If a shirt is dry, put the shirt on the machine, then spray the shirt with a little water until it is damp, not dripping.

It does one piece of clothing at a time.

Five shirts from one wash means five runs, one after another. Leave the next shirts inside the washer until it is their turn. Hang each shirt as soon as you take it off the machine.

It is not the quick tool for one dry shirt.

One shirt takes about 8 to 12 minutes on our machine. An iron can be faster, even for one shirt. For a quick touch-up on a dry shirt, your steamer will be done sooner.

It does not make a pressed line (the sharp fold line an iron makes) on the sleeves.

Sleeves dry smooth and round, with no pressed line down the top of the sleeve. If you want that line, use your iron.

Picture neededLaunch gate two-sleeve photo: both sleeves of the same cotton dress shirt right after one run, round, with no pressed line
Caption: Both sleeves of the same shirt, right after the run: round, with no pressed line.

It is not for suits or coats.

Suits, suit jackets and coats should still go to the dry cleaner. Your steamer is still good for a quick touch-up on them.

It does not wash.

Your washer does the washing, as it does now. Our machine is for the step after the wash.

It fits shirts from size S to XXL.

Zippers on the shirt attachment make it bigger or smaller. We cannot promise a fit for shirts in 3XL or bigger.

It costs more than a clothes steamer.

The price of each set is on the product page, one tap from here.

Picture neededLaunch gate collar close-up: the collar and the strip where the buttons are, on one cotton dress shirt put on the machine damp, right after one run, unretouched, raw file and date kept (Edvinas)
Caption: The collar and the strip where the buttons are, on one cotton dress shirt, right after one run. Nobody ironed them.

Next, here is how a steamer works, and how our machine works.

What a clothes steamer is made to do

A clothes steamer does thin shirts and quick fixes well. It warms the cloth with steam, one part of the shirt at a time.

Then you move the steamer to the next part. Nothing holds the part you just steamed while that part dries. On a cotton dress shirt, some wrinkles stay.

A stronger steamer makes more steam. It still moves to the next part before the cloth is dry.

Our machine is made for that step. The shirt attachment holds the whole shirt until the shirt is dry.

Picture needed a hand moves an unbranded handheld steamer from the front of a cotton dress shirt to a sleeve, shirt on a door hook
Caption: The steamer is now on the sleeve. Nothing holds the front of the shirt while the front dries.

See how it works

Picture neededLaunch gate uncut timed run: one cotton dress shirt, still damp from the washer, one full run, not sped up, a real clock on screen; the last 3 seconds hold on the front of the shirt. The clock shows the real minutes; if the run is longer than 12 minutes, the time line changes before launch.
Caption: One cotton dress shirt, one full run, not sped up. The clock in the corner shows the real time.
Daniel shows how our Lissaire machine works.
  1. 1. Wash the shirt in your washer, as you do now.
  2. 2. Close all the buttons on the shirt, including the buttons on the cuffs.
  3. 3. While the shirt is still damp from the washer, put the shirt on the machine: pull the shirt over the shirt attachment.
  4. 4. Choose the heat and the time, and start the machine. Air fills the attachment, and the attachment holds the shirt gently pulled smooth from the inside.
A finger presses a button next to the round display on the Lissaire base.
The buttons for the heat and the time.
  1. 5. Put the weighted clips (small, heavy clips) on the bottom of the shirt. The clips keep the bottom of the shirt pulled down while the shirt dries.
Picture needed Real photo from the product shoot: two hands put a round white weighted clip on the bottom of a shirt on the machine (grey satin band under the hem, lit 888 display, LISSAIRE logo as on the real base). The 31 Oct picture failed the product look check on 10 Nov.
Caption: Hands put a weighted clip on the bottom of the shirt.
  1. 6. Warm air dries the shirt while the shirt is held smooth. Do something else nearby while it runs, like making coffee or answering emails. The base and the poles of the machine get hot, so do not touch them while it runs.
  2. 7. After about 8 to 12 minutes, take the shirt off the machine and hang it.

What the shirt attachment does that a hand cannot

A navy shirt with every button closed on the Lissaire machine, a round white clip on the bottom of the shirt.
  1. The shirt attachment fills the shirt from the inside. The front, the back and the sleeves stay gently pulled smooth, with no wrinkles in the cloth, at the same time.
  2. The weighted clips keep the bottom of the shirt pulled down.
  3. Warm air dries the shirt while the shirt stays pulled smooth.
Picture neededLaunch gate same-shirt before/after: the front of one cotton dress shirt, on the left still damp from the washer, on the right after one run, not retouched, raw file and date kept
Caption: The front of one cotton dress shirt: on the left, still damp from the washer; on the right, after one run on our machine. Not retouched.

Our machine uses warm air, not steam. There is no water tank, so you never refill it and you never buy distilled water for it. The water comes from the shirt, still damp from the washer.

See the machine on the product page

What people who bought it say

I was a bit sceptical but it does a surprisingly good job.

Simon W., verified buyer, 18 Sep 2026

Not every buyer is happy with the result. Some say their shirts still had wrinkles.

Our best tip: start with a shirt that is still damp from the washer.

You may also find unhappy reviews on other websites.

More than 11,000 orders since June 2025.

Keep your steamer

Your steamer still has jobs: a quick touch-up on a dry shirt, a suit or a coat, and trips.

Our machine is for clothes right after the wash. The shirt attachment takes shirts, T-shirts, polo shirts, sweaters and hoodies. Shirts made of 100% polyester, rayon or nylon also work, at the lowest heat.

More questions

Can my dryer do this?

No. A dryer dries the shirt while the shirt tumbles, so nothing keeps the shirt smooth. Take the shirt out of the washer and put the shirt on our machine instead of in the dryer.

What if a shirt dries before its turn, or I steam my shirts the night before?

You can keep that night. Put the dry shirt on the machine, then spray the shirt with a little water until it is damp, not dripping. Do not let water drip onto the machine. A shirt that is damp from the washer is still the easiest start.

What stops the machine from getting too hot?

It has a safety switch that turns it off if it gets too hot.

The set we suggest for steamer owners

We suggest the Wardrobe Press set. It comes with our machine, the shirt, pants and shoe attachments, and the weighted clips from step 5.

The Solo Press set comes with the machine and the shirt attachment. It has no weighted clips.

The shoe attachment dries shoes after you wash them. It does not press them. The dress attachment is sold separately, and it works with both sets.

Picture needed a photo of the real Wardrobe Press box contents, weighted clips in front; until Ed confirms a render matches the box, a render runs only with the caption below (C3-11)
Caption: Illustration of the Wardrobe Press set.

Comparing our machine with a cheaper one? Check these five things on any ironing machine.

  • 1. The attachments in the box. In our Wardrobe Press set: the shirt, pants and shoe attachments.
  • 2. Weighted clips for the bottom of the shirt. Ours come in the Wardrobe Press set.
  • 3. The warranty. Every machine of ours comes with a 6-month warranty.
  • 4. What happens if the machine does not work. Ours: the 60-day guarantee below.
  • 5. Where it ships from. Most of our orders ship from our US warehouse.
See the Wardrobe Press and its price

The 60-day guarantee: if the machine does not work when you follow the guide, email us a short video within 60 days of delivery. We check it, then send you a new machine or a refund.

The guide is the how-to booklet in the box.

Most orders ship from our US warehouse. Standard delivery takes about 5 to 8 days. Express delivery takes 3 to 5 workdays (Monday to Friday).

Every machine comes with a 6-month manufacturer's warranty.

Questions? Email us at Info@Lissaire.com.

This page is from Lissaire. Hana and Ed started Lissaire. We sell the Lissaire Automatic Ironing Machine.

Related guide: Do automatic ironing machines work? An honest guide