From Lissaire
Your clothes steamer works fine on thin shirts. So why do your cotton dress shirts still have wrinkles?
Here is the short answer. A cotton shirt keeps its wrinkles unless something keeps the shirt gently pulled smooth until it is dry.
A steamer warms one part of the shirt at a time. When you move the steamer to the next part, nothing holds the part you just steamed.
We're Lissaire. We sell a machine that keeps a cotton shirt gently pulled smooth until the shirt is dry. You will see it near the end of this page, with what it cannot do.
From the Lissaire team
A clothes steamer is a good tool. It is light, and it works on a shirt while the shirt hangs on a hanger.
On a thin shirt or a T-shirt, a few passes of steam remove most of the wrinkles.
Then you steam a cotton dress shirt. You hold the steamer up and go over the front, the back and both sleeves. When you step back, some wrinkles are still there. Some owners get the ironing board out after that.
We read 363 comments about clothes steamers on Reddit, written between October 2024 and October 2026. When people said some wrinkles stayed after they steamed, the cloth they named most often was cotton.
What steam does to a cotton shirt
Steam makes the cloth warm and a little wet. Warm, wet cotton is soft, so a wrinkle can loosen.
Then you move the steamer to the next part of the shirt. The part you just steamed is still warm and a little wet, and now nothing holds that part flat while it dries.
That is why a common steamer tip is to pull the cloth flat with your other hand while you steam.
Your other hand holds the cloth flat for a moment. Then your hand moves with the steamer to the next part, and the shirt is not dry yet.
The missing step: keep the shirt pulled smooth until it is dry
So the steam is not the problem. A clothes steamer is made to move over the shirt, one part at a time. A steamer is not made to stay on the shirt until the shirt is dry.
Owners say they notice this most on cotton dress shirts.
People who iron well already use this step
Many people who iron well iron a shirt right after the wash, while the shirt is still damp (a little wet), and then hang it.
The iron holds the damp cloth flat on the ironing board while the heat dries it. That is the same step: damp cloth, kept smooth until it is dry.
While the shirt dries, what keeps it smooth?
| Clothes steamer | your other hand, for a moment. Then the steamer moves to the next part. |
|---|---|
| Iron | the iron on the ironing board, one part at a time, while you iron. |
| Clothes dryer | nothing. The shirt tumbles. |
What this means for your cotton dress shirts
Steam alone often leaves some wrinkles in a cotton dress shirt. The shirt also has to stay gently pulled smooth, with no wrinkles in the cloth, until it is dry.
You can do that with an iron, one part at a time, with your hand on the iron the whole time. An iron can be faster, even for one shirt.
Or a machine can do the holding for the front, the back and the sleeves at the same time. On our machine, your hands are free while the shirt dries.
This one step is what our Lissaire machine does
Our Lissaire machine is made for this one step. Here is how it works.
Wash your clothes. Pull the shirt over the shirt attachment (the part of the machine that goes inside the shirt) while the shirt is still damp from the washer. Choose the heat and the time and start the machine. The attachment fills with air inside the shirt and keeps the shirt gently pulled smooth. Warm air dries the shirt in that smooth shape. After about 8 to 12 minutes, take the shirt off.
Our machine uses warm air, not steam. It has no water tank, so there is no distilled water to buy. The water comes from the shirt, still damp from the washer.
Your hands are free while it runs. You can make coffee or answer emails nearby.
The shirt attachment takes shirts, T-shirts, polo shirts, sweaters and hoodies. Shirts made of 100% polyester, rayon or nylon also work, at the lowest heat.
While the shirt dries, what keeps it smooth?
| Clothes steamer | your other hand, for a moment. Then the steamer moves to the next part. |
|---|---|
| Iron | the iron on the ironing board, one part at a time, while you iron. |
| Clothes dryer | nothing. The shirt tumbles. |
| Our Lissaire machine | the shirt attachment, inside the shirt, keeps the front, the back and the sleeves gently pulled smooth until they are dry. |
What one buyer says
While I wish there weren't what feels like a million accessories, I do love the product. It does a good job and worth the investment.
Not every buyer is happy with the result. Some say their shirts still had wrinkles.
The step that matters most is a shirt that is still damp from the washer.
More than 11,000 orders since June 2025.
What it cannot do, and what you have to do
- Our machine works while the shirt dries. So the shirt has to be damp before you start the machine: still damp from the washer, but not dripping. A shirt that is already dry keeps its wrinkles on our machine. If a shirt is dry, put the shirt on the machine, then spray the shirt with a little water until it is damp, not dripping.
- Our machine does one piece of clothing at a time. If you wash five shirts, that is five runs, one after another.
- Each shirt takes about 8 to 12 minutes. For a quick touch-up on a dry shirt, your steamer is the quicker tool.
- Sleeves dry smooth and round, with no pressed line (the sharp fold line an iron makes) down the top of the sleeve. If you want that line, use your iron.
- Suits, suit jackets and coats should still go to the dry cleaner.
- The shirt attachment fits shirts from size S to XXL. For 3XL or bigger, we cannot promise a fit.
Before you start, close all the buttons, including the buttons on the cuffs (the ends of the sleeves).
Our machine costs more than a clothes steamer. You can see the price of each set on the product page.
How to use your steamer and our machine together
Keep your steamer for a quick touch-up on a dry shirt, a suit or a coat.
Put your cotton dress shirts on our machine right after the wash, one after another, while each shirt is still damp.
Leave the next shirts inside the washer until it is their turn. Hang each shirt as soon as you take it off the machine.
Do you steam your shirts the night before? You can keep that night. Put the dry shirt on the machine, then spray the shirt with a little water until it is damp, not dripping. Do not let water drip onto the machine.
Our machine does not wash. You wash your shirts in your washer, as you do now.
Our suggestion for steamer owners
For steamer owners, we suggest the Wardrobe Press set. In that set you get our machine with the shirt, pants and shoe attachments, plus the weighted clips.
The weighted clips (small, heavy clips) hang on the bottom of the shirt and keep the shirt pulled down while it dries. With a steamer, your other hand does that job for a moment.
You do not need every attachment on the first day. For a shirt, you use the shirt attachment and the weighted clips.
The Solo Press set has the machine and the shirt attachment, with no weighted clips. The shoe attachment that comes with the Wardrobe Press set dries shoes after you wash them. The dress attachment is sold separately, for either set.
The product page shows the price of each set and lists what comes in it.
Comparing our machine with a cheaper one? Check these five things on any ironing machine.
- 1. The attachments in the box. In our Wardrobe Press set: the shirt, pants and shoe attachments.
- 2. Weighted clips for the bottom of the shirt. Ours come in the Wardrobe Press set.
- 3. The warranty. Every machine of ours comes with a 6-month warranty.
- 4. What happens if the machine does not work. Ours: the 60-day guarantee below.
- 5. Where it ships from. Most of our orders ship from our US warehouse.
The 60-day guarantee: if the machine does not work when you follow the guide, email us a short video within 60 days of delivery. We check it, then send you a new machine or a refund.
The guide is the how-to booklet in the box.
Most orders ship from our US warehouse. Standard delivery takes about 5 to 8 days. Express delivery takes 3 to 5 workdays (Monday to Friday).
Every machine comes with a 6-month manufacturer's warranty.
Questions? Email us at Info@Lissaire.com.
So why does a cotton dress shirt still have wrinkles after you steam it? Because nothing keeps it gently pulled smooth until it is dry.
Your steamer is still a good tool. It is made for a different job.
This article is from Lissaire. Hana and Ed started Lissaire. We sell the Lissaire Automatic Ironing Machine.
Related guide: Steamer vs iron vs automatic ironing machine: which is best?