Lissaire guide
How to iron a shirt collar and cuffs (iron, steamer or machine)
Clear steps to get a smooth shirt collar and cuffs with an iron. We also explain what a steamer and an automatic ironing machine can and cannot do.

By Hana, co-founder of Lissaire
Updated · 8 min read

On this page
To iron a shirt collar, start with a damp collar (a little wet). Iron the underside first, then the top side, from each corner of the collar toward the middle. Iron the cuffs (the ends of the sleeves) inside first, then outside, and go around the buttons.
Key takeaways
- Iron the underside of a damp collar first, then the top side, from each corner toward the middle.
- Iron each cuff open and flat, inside first, then outside, and iron around the buttons, not over them.
- A clothes steamer can soften collar wrinkles, but it cannot make sharp folds, say Rowenta and Reader's Digest.
- On the Lissaire Automatic Ironing Machine, a damp collar and cuffs dry smooth if you close the buttons and lift the collar.
- An automatic ironing machine cannot make a sharp fold down the sleeves. For that fold, use an iron.
How do you iron a shirt collar with an iron?
Iron the underside of the collar first, then the top side. Move the iron from each corner of the collar toward the middle. This helps stop small folds at the corners.
If you iron well, you may know these steps already.
- Check the care label. Set the iron to the right heat for the fabric. If you are not sure, start with less heat.
- If the collar has collar stays, take them out. Collar stays are the small, stiff strips inside the collar corners. Heat can bend plastic ones.
- Make sure the collar is damp. If the shirt is dry, spray the collar with water.
- Unfold the collar and lay it flat on the ironing board, with the underside facing up. The underside is the side you cannot see when the collar is folded down.
- Iron from one corner of the collar toward the middle. Then iron from the other corner toward the middle.
- Turn the collar over. Iron the top side the same way, from each corner toward the middle.
- Fold the collar down where it folds when you wear the shirt. You can iron the fold lightly, or you can leave it soft.
- Hang the shirt on a hanger as soon as you finish, and close the top button. The collar then keeps its shape while it cools.
Why does this work? Gentleman's Gazette says an iron uses heat of about 250°F to 360°F, plus pressure. The heat dries the damp collar while the iron holds it flat. The collar stays flat because of one rule: cloth keeps the shape it has when it dries.
The same rule explains why a steamer has trouble with a collar, and how an automatic ironing machine gets one smooth.
To wash the shirt at home before you iron it, read how to wash and iron dress shirts at home.
How do you iron the cuffs (the ends of the sleeves)?
Unbutton the cuff and lay it flat. Iron the inside first, then the outside. Iron around the buttons, not over them.
- Unbutton the cuff and lay it flat on the ironing board.
- Make sure the cuff is damp. If it is dry, spray it with water.
- Iron the inside of the cuff first.
- Turn the cuff over and iron the outside.
- Use the tip of the iron to iron around the buttons. Do not iron over the buttons, because heat and pressure can damage them.
French cuffs are long cuffs that fold back and close with cufflinks. Iron a French cuff open and flat first. Then fold it back. You can leave that fold soft.
Can a steamer smooth a shirt collar?
A steamer can soften the wrinkles in a collar. It cannot make the collar lie flat the way an iron can.
Rowenta and Reader's Digest both say a steamer softens wrinkles while the shirt hangs, but it cannot make sharp folds.
It is hard for a steamer to smooth a collar, for three reasons.
- A collar is thicker and stiffer than the rest of the shirt.
- Steam adds water and warmth, but nothing holds the collar flat while it dries.
- Cloth keeps the shape it has when it dries. So the collar dries in the shape it had while the shirt hung.
A steamer is still good for delicate fabrics, knitted clothes and travel, say Rowenta and Reader's Digest.
If a steamer is all you have, steam the collar and wait a moment. Then smooth the collar with your hand, and let it dry while the shirt hangs. Be careful, because steam can burn your skin.
If you would rather not hold the collar smooth by hand, an automatic ironing machine holds the whole damp shirt smooth while it dries. Our buyer survey had 552 answers (28 August to 27 October 2026). Of the people who bought the Lissaire machine, 31% had used a steamer for their shirts before. Buyers could pick more than one answer.
Does an automatic ironing machine iron the collar and cuffs?
Yes, when you start with a damp shirt. Close the shirt's buttons and lift the collar so it stands up around the neck. The collar and the cuffs then dry smooth with the rest of the shirt.
Here is why. You pull the damp shirt over the shirt attachment, the part of the machine your shirt goes on. Warm air fills the shirt attachment. The attachment then holds the shirt smooth and gently pulled while the air dries it. The collar dries while it stands up smooth, so it stays smooth. This is the same rule as with the iron: cloth keeps the shape it has when it dries.
Some people read that these machines leave collars wrinkled. In our email survey of people who did not buy (168 answers, 6 to 15 October 2026), 5.5% named the collar and cuffs. A dry shirt keeps its wrinkles, and so does a dry collar. Some of our early bad reviews came from people who put dry shirts on the machine.
If you are not sure these machines work at all, read our guide Do automatic ironing machines work?
What can an automatic ironing machine not do?
An automatic ironing machine cannot make a sharp fold down the sleeves, the way an iron does. The sleeves dry smooth and round. If you want that fold, use your iron.
The collar dries standing up. When you fold it down, it sits neatly without an iron.
The Lissaire machine has other limits too.
- It does one piece of clothing at a time. An iron can be faster, even for one shirt.
- It works on sizes S to XXL. Sizes larger than XXL, such as 3XL, do not work on it.
- Suits, suit jackets and thick coats still go to the dry cleaner.
| Job | Iron | Steamer | Lissaire machine, damp shirt |
|---|---|---|---|
| Smooth collar | Yes. | It softens wrinkles. | Yes. |
| Smooth cuffs | Yes. | It softens wrinkles. | Yes. |
| Sharp fold down the sleeves | Yes. | No. | No. |
| Your hands are free | No. | No. | Yes. |
| Needs an ironing board | Yes. | No. | No. |
Sources: Rowenta and Reader's Digest for the steamer, and Ruler of London for the ironing board.
Collar and cuffs on the Lissaire Automatic Ironing Machine (the machine we sell)
Lissaire is a company founded by Hana and Ed. It sells the Lissaire Automatic Ironing Machine.
With the Lissaire machine, the shirt goes on damp from the washer, and your hands are free while it dries. A shirt takes about 8 to 12 minutes. In that time, you can make coffee or read. With other attachments, the same machine does pants, jeans and dresses. It can also replace the dry cleaner for everyday shirts that you can wash at home.
The steps below are for the Lissaire machine. Other machines may be different.
- Start with a shirt that is damp from the washer, but not dripping. If the shirt is dry, spray it with water until it feels damp.
- Close the shirt's buttons, including the buttons on the cuffs.
- Pull the damp shirt down over the shirt attachment. The attachment's two arms go inside the sleeves.
- Lift the collar so it stands up around the neck.
- Set the heat and the timer, and turn the machine on. Use 140°F for everyday shirts and 167°F for thick cotton. Check the care label first. If you are not sure, start with less heat.
- Clip the weighted clips to the bottom of the shirt.
- When the timer ends, the shirt is dry. Fold the collar down. Then wear the shirt or hang it in your closet.
Lissaire tip: If you spray a dry shirt, spray the collar and the cuffs too, until they feel damp. A dry collar keeps its wrinkles, even on the Lissaire machine.
You can watch each step on a real shirt in our How it works videos.
The machine's limits are listed in the section above.
See how the Lissaire machine works.
Quick answers
Should a shirt collar be damp when you iron it?
Yes. Cloth keeps the shape it has when it dries, so a damp collar dries flat under the iron. If the collar is dry, spray it with a little water first.
Which side of the collar do you iron first?
Iron the underside first. This is the side you cannot see when the collar is folded down. Then iron the top side, from each corner toward the middle.
Can a steamer make a collar flat?
A steamer can soften the wrinkles in a collar, but it cannot make sharp folds, say Rowenta and Reader's Digest. For a flat collar, use an iron.
Does an automatic ironing machine leave the collar wrinkled?
Not when you start with a damp shirt. On the Lissaire machine, close the shirt's buttons and lift the collar so it stands up around the neck. A dry shirt keeps its wrinkles, so spray it with water first.
Can an automatic ironing machine make a fold down the sleeves?
No. The sleeves dry smooth and round. If you want a sharp fold, use your iron.
More guides
-
11 min read
How to get wrinkles out of shirts: 7 ways and how each works
Shower steam, a wet towel in the dryer, a spray for wrinkles: how each way works, and what people say about it. Way 7 is the...
Read the guide -
11 min read
Is an ironing machine a good Christmas gift? 4 yes, 1 no
4 people on your Christmas list who would use an ironing machine, and 1 who would not. Start with how they make their shirts smooth now.
Read the guide -
9 min read
Cost to dry clean shirts: one year, at your own price
$3 a shirt, 5 shirts a week is $780 a year at the dry cleaner. Put in your own price and see your year, plus 7...
Read the guide


